Our most popular and cost-efficient option for the test of multiple LEDs — testing three LEDs with a single Sensor. This method of testing LEDs scales up, so that testing 3, 30, 300 — or any number of LEDs — is far more cost-efficient than other methods. This is our most popular Fiber-optic Probe and can be combined with any of our Universal LightProbe Sensors.
There are two types of “Trident” Fiber-optic Probes – and for each type there is a choice of stainless-steel tips – as outlined below. For dimension drawings and full part numbers, please see the Fiber-optic Probe Quick-Guide
The Original Trident
The original “Trident” has three separate Fiber-optic Probes that are inserted into a single Universal LightProbe Sensor. The advantage of the original “Trident” is that if one of the Fiber-optic Probes becomes damaged, that single probe is replaceable. Part number suffix is: 250T-12×12.
The Skinny Trident
The “Skinny Trident” has three Fiber-optic Probes that are assembled into a single stainless-steel housing, which is then inserted into the Universal LightProbe Sensor. These individual Fiber-optic Probes are not replaceable. If one is damaged, the entire unit needs to be replaced. Part number suffix is: 250T/13-12.
There are 6 tip styles in the Trident model and 5 tip styles in the Skinny Trident model available to account for variations in working distance, LED orientation and accessibility:
Above tips available in both Trident and Skinny Trident models
Above 12P Side-looking tips available in Trident model only
For dimension drawings and full part numbers, please see the Fiber-optic Probe Quick-Guide
For information on part numbers and ordering, please see the Optomistic Products Catalog